Wi-Fi Network Installation That Fades Into the Background
Professional Wi-Fi network installation starts with a simple question in a Northern New Jersey house: where does the signal fail, and what depends on it? Total Home Technologies has planned, built and supported residential networks from Roseland since 1992, for families in Bergen, Passaic, Essex, Hudson and Sussex Counties. The work is led by an engineering mindset, so coverage is measured where people actually sit, stream and work rather than judged by the speed printed on an internet bill, and the equipment behind it is Cisco Meraki or Araknis.
Fast service at the curb does not guarantee a fast bedroom upstairs. Plaster and lath, stone foundations, radiant floors, steel beams from a renovation and a garage turned into a gym all weaken a wireless signal in different ways. A network that holds up is one designed around the floor plan, the building materials and the number of devices in daily use.
Most Total Home networks pair ceiling or wall access points with cable back to a central rack. Both platforms are chosen because they can be monitored, updated and supported over time instead of replaced every few years.
Fixing the Network You Already Have
A slow or unreliable network does not automatically call for new equipment. Often the trouble is one poorly placed access point, an extender daisy-chained to another extender, or a router the internet provider swapped without telling anyone how the rest was set up.
Total Home tests the network where it fails, reviews the wiring and the rack, and keeps any cabling and hardware that still perform well. Networks installed by another company are welcome, including ones where nobody can find the admin login.
Common Network Service Calls
✓ Rooms upstairs, in the basement or over the garage with no usable signal
✓ Video meetings that freeze in the home office
✓ Cameras, doorbells and smart devices that keep dropping offline
✓ A collection of extenders and mesh pucks that never quite worked
✓ Evening streaming that buffers when the whole family is online
✓ No passwords, drawings or labels left by the last installer
Total Home runs a 24/7 Help Desk and offers 24/7 service plans with phone support, and service-plan customers receive priority onsite service. The Help Desk is in-house and works with OneVision Resources. More detail is on the support page.
Call (877) 550-5150 About Your Network
Why Families Invest in a Planned Network
The payoff shows up in the rooms where a weak signal used to be the first thing anyone noticed.
The Home Office Holds Up
A back bedroom or finished basement can become a reliable workspace once an access point is placed near the desk, so calls stay clear and huge uploads finish when they should.
Every Floor Gets Coverage
Bedrooms, the lower level, the garage and the porch all get the same planned signal, so nobody has to stand in the kitchen next to the router just to finish a single download.
Busy Nights Stay Smooth
A network sized for dozens of devices keeps streaming, games and video calls running smoothly when the entire family and a houseful of holiday guests are online at the same time.
The Rest of the House Behaves
Music, cameras, keypads, door stations and thermostats all depend on the network, so a steady connection is the quiet reason the rest of the technology keeps responding daily.
Network Solutions for Northern New Jersey Houses
Each property gets its own mix of cable, access points and equipment, based on how it was built and how the family uses it.
Whole-Home Wireless Coverage
Access points mount discreetly on ceilings or walls and pass phones and laptops from one to the next as you walk through the house. Placement follows the floor plan and wall materials, which matters in older Essex and Bergen colonials with thick plaster and in large new builds with long sightlines.
✓ Planned access point locations
✓ Smooth roaming between rooms
✓ Coverage verified after setup
Wired Backbone and Structured Cabling
Wireless works best when it rides on cable. Access points, TVs, gaming consoles and the home office connect back to a central switch wherever practical, which frees wireless capacity for the devices that move around. In finished houses, cable usually travels through basements, attics and closets rather than open walls.
✓ Cable to access points and key rooms
✓ A labeled, organized equipment rack
✓ Prewire during construction or retrofit later
Outdoor and Detached Building Coverage
Patios, pool houses, guest cottages and barns on larger Sussex and Bergen properties get weather-rated access points of their own. That signal is what keeps an outdoor TV streaming and backyard music playing, and it is covered in more depth on the outdoor Wi-Fi page and the outdoor entertainment page.
Guest and Device Networks
Visitors get simple access that never touches family computers. Cameras, thermostats and other smart devices sit on a separate network of their own, which makes problems easier to isolate and keeps everyday browsing apart from the gear that runs the house.
Networks Built for Automation
Control4 and Savant systems depend on a network that does not hiccup. When the network and the control system are planned by the same team, keypads, touchscreens and remotes stay responsive. See how that fits together on the home automation page.
Remote Monitoring and Support
Where the equipment allows, the Help Desk can check the network remotely, spot a failing switch or access point, and often resolve an issue before a visit is needed. When a technician does need to come out, the documentation is already on file.
Featured Technology Partners
Two networking platforms carry nearly every Total Home installation, tied into the control system where it helps.
SONY LOGO PLACEHOLDER
Cisco Meraki
Access points and switches that can be watched, updated and supported over time.
CONTROL4 LOGO PLACEHOLDER
Araknis
Routers, switches and access points built for homes full of AV and control gear.
Control4
Network planned alongside the control system so keypads and remotes stay quick.
Also in Our Network Projects
Savant
How a Total Home Network Comes Together
Discovery
We start with where the signal fails today, then review the internet service, the current router, in-wall cabling and every system that relies on the network across the house.
Design
You review a plan showing each access point and cable run, which equipment goes in the rack, and how guests, family devices and smart home gear stay on their own networks too.
Installation & Programming
The rack is assembled and bench-tested in our shop, cable is run and access points are mounted, then the network is tuned on site and coverage is checked in every single room.
Support
Afterward the network stays documented and supported. Many issues can be checked from our office, and service plan customers move up the schedule if an onsite visit is needed.
Why Total Home for Your Network
Tested Before It Reaches the House
Keith W. Harrison founded the company on January 2, 1992, and his engineering training still shapes the approach: test before deployment, measure the result, and keep the complexity out of the homeowner's hands. Firmware and software updates are tested before they reach a client's network, and central racks are built and checked in the shop before they arrive.
One Team for Everything on the Network
Because the same team designs the automation, audio, video and cameras on a project, there is no back-and-forth between a network vendor and an AV vendor when something drops offline.
Recognized by the Industry
Total Home is a Control4 Pinnacle Dealer and is listed among the CE Pro Top 100 Dealers.
WHERE WE WORK
Home Networks Across Northern New Jersey
Network projects range from stone and stucco houses in Ridgewood and Englewood to additions in Cedar Grove, waterfront townhomes in Weehawken and farm properties with outbuildings near Sparta. Each one starts with the same walk-through. You can see networking, automation and the equipment behind them at the Roseland showroom, 183 Eagle Rock Avenue, Roseland, NJ 07068, by appointment.
What Our Clients Say
Home Wi-Fi Questions
Why is the Wi-Fi weak in some rooms and fine in others?
Walls, floors and building materials absorb wireless signal, and one router in a corner cannot reach every room of a larger house. Additional wired access points usually solve it.
Is a mesh kit from the store enough?
For a small, open floor plan it can be. In larger or older houses, wireless-only mesh loses speed with each hop, so access points wired back to the rack give steadier results.
Do walls need to be opened to run cable?
Usually not. Cable can often travel through basements, attics and closets, and existing wiring can sometimes be reused. The site visit shows what is practical.
Will my internet provider's equipment stay in place?
In most houses the provider's modem or gateway stays to bring service in, and the Total Home network takes over from that point.
Can you take over a network another company installed?
Yes. The equipment is documented, access is recovered through the manufacturer's process with your permission, and anything that still performs well stays in service.
Which parts of New Jersey does Total Home cover for networking?
Total Home designs and supports home networks across Bergen, Passaic, Essex, Hudson and Sussex Counties from its Roseland base.